for Citroen ID, DS
 | 123\DS-A is a distributor, specifically targeted for the Citroen ID/DS. It contains all the curves for carbureted ID/DS-engines as originally specified by Citroen, for cars after July 1959.
With a switch you can easily choose the advance-curve that was specified for your engine.
It comes with an angled distributor-cap, for easy access to the sparkplug-leads.
Might you prefer un upright cap, please specify a '123\DS-R'
For ID's until 2/1964 Citroen used a distributor with vacuum-advance. To replace this you should order a '123\DS-R-V'.
ID-19B's from 9-'66 until 9-'68 with 'DV'-engine , and DS19A / DS19MA & ID19FA with 'DY'-engine from '65 to '68 require a different fixation. For these cars we offer a '123\DV-R' with a special mounting bracket.
|
Installation manual
| SPECIFICATIONS |
| direct. |
: CW (topview) |
| voltage |
: 4,0-15,0 Volts |
| range |
: 500 - 7000 rpm |
| temperature |
: -30 to 85 Celsius |
| coil |
: stock or High Energy coil |
|
primary coil NOT below 1,0 ohm |
| dwell |
: constant current, fully autom. |
| time-out |
: after 1 second current is switched off |
| spark-bal. |
: better than 0,5 degr. crankshaft |
| vacuum |
: advance starts at 5 inchHg |
|
stops at 10 degr. @ 10 inchHg |
|
gearshift retard > 17 inchHg |
| max.advance |
: 45 degr. crankshaft |
| wiring |
: red = +6V or +12V, black = '-' coil |
|
|