Products : 123\LANCIA-4-R-V

Fulvia

The 123\LANCIA-4-R-V is designed with the help of Lancia enthusiasts. As these cars are becoming quite rare, we have chosen to introduce a product that offers all the necessary advance-curves, but that may need some fiddling before it can be mounted. For the Fulvia this means, that the gearwheel from the original distributor needs to be replaced. ( which is an easy job as everything is prepared by us ) For the Flavia, things are slightly more complicated, but we think almost every handy classic car enthusiast will be able to replace the original drive-dog and find a proper spacer between the mounting-bracket and the flange on the 123ignition. We have integrated all the required 7 advance-curves for Fulvia 1,2 and 3 and Flavia 1,2 and 3. And the experience ? Well, the engines run beautifully, without exception !

Installation manual SPECIFICATIONS direct. : CW (topview) voltage : 4,0-15,0 Volts range : 500 - 7000 rpm temperature : -30 to 85 Celsius coil : stock or High Energy coil primary coil NOT below 1,0 ohm dwell : constant current, fully autom. time-out : after 1 second current is switched off spark-bal. : better than 0,5 degr. crankshaft vacuum : advance starts at 5 inchHg stops at 10 degr. @ 10 inchHg gearshift retard > 17 inchHg max.advance : 45 degr. crankshaft wiring : red = +6V or +12V, black = '-' coil